[vc_row][vc_column][vc_column_text] This tool is used to measure an Angle by selecting 3 points. Use: Utilities => Measure => Angle x 3 Points[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”527″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open, select the appropriate option: Disjoint – is the default option and is used to measure 1 angle using 3 points. Continuous – is an option that allows […]
Category: Measure
Utilities => Measure Menu
Measure Bearing / Distance
[vc_row][vc_column][vc_column_text] This tool is used to measure a bearing and distance between 2 points. Use: Utilities => Measure => Bearing/Distance[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”516″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open: Select the mode: Disjoint – is the default option to measure between 2 points. Continuous – in this mode, after the initial measure has been reported in the panel, […]
Measure Plan Area
[vc_row][vc_column][vc_column_text] This tool is used to measure a Plan Areas enclosed by strings. Use: Utilities => Measure => Plan Area Note: If a string is not closed, the first and last points are considered to be connected to form a polygon.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”511″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open: Mode Options: Disjoint – will only display the […]
Measure Surface Area
[vc_row][vc_column][vc_column_text] This tool is used to measure the surface area of a tin restricted by a specified polygon. Use: Utilities => Measure => Surface Area[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”499″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open: Select the Tin – for the Surface area to be calculated from. Report Type – select the format for the report to be created […]
Measure Value
[vc_row][vc_column][vc_column_text] This tool is used to calculate and display any of the measures available in the Measures pop-up menu. Use: Utilities => Measure => Value Note: The Measures pop-up menu can be found in numerous panel through out the 12d Model program.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”473″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open, there are four options: At Point (Point […]
Measure String From Point
[vc_row][vc_column][vc_column_text] This tool is used to measure Chainage and Offset from a string to a point. Use: Utilities => Measure => String from point[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”546″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open: Select the String to measure – the Chainage will be measured along this string. Extend Mode: – No extending – Only the selected string will […]
Measure String from Cursor
[vc_row][vc_column][vc_column_text] This tool is used to measure Chainage and Offset of the a Cursor Position from a selected String. This option does not allow a point/string to be selected, but dynamically displays the cursor position information from the selected string to measure from. Use: Utilities => Measure => String from cursor[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”541″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel […]
Measure Xfall by Strings
[vc_row][vc_column][vc_column_text] This tool is used to measure the Crossfall (Xfall) between 2 selected strings. Use: Utilities => Measure => Xfall by Strings[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”536″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open: Select the Reference String – this could be a Road Centreline Super Alignment and the Chainage will be calculated from this string, and the calculation between strings […]
Measure Xfall by Strings (Advanced)
[vc_row][vc_column][vc_column_text] This tool is used to measure the Crossfall (Xfall) between 2 strings. Use: Utilities => Measure => Xfall by Strings (advanced)[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”505″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Once the panel is open: The strings can be selected individually or the Pick All button allows the 3 strings to be picked one after the other with one button. Select the […]