[vc_row][vc_column][vc_column_text] Information on this option can found via this link. The option is also present under the 12d Main Menu. Tin => Drape => Alignment For an example of the use of this option please refer to the link above.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_separator border_width=”5″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]To access this panel, Use: Design => Roads => More => Drape Alignment String or […]
Category: More
Design => Roads => More Menu
Road Widening
[vc_row][vc_column][vc_column_text] This option can be used in many ways to create a crossfall envelope. This is very handy to identify as the minimum or maximum x-fall values to design between to maintain a known/desired standard. Cross Section strings and a tin surface can be generated to a viewed (profiled) in section. These can provide a […]
Special Chainage File
[vc_row][vc_column][vc_column_text] This 12d tool is used to create a special chainage file for any alignment/super alignment string. The chainages are created for a selected reference string but can then be defined by dropping strings and/or individual points onto the reference string. The option will re-organise the chainage order to ensure they increase for you. […]
X Section function
[vc_row][vc_column][vc_column_text] This option is know as “Section Segment Removal” and can be selected from the 12d “Road” toolbar or opened via the main menu. The option was developed to remove Cross Section segments prior to plotting and is typically used on existing design projects (Brown field sites). Please watch a short video below on how […]