[vc_row][vc_column][vc_column_text]
This “Settlement” option can be used to create a New Model from an existing model by using values of different levels.
Find this option here: Main menu under Design => More => Settlement
I can see this being useful in two scenarios described below:[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_separator border_width=”5″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Scenarios A:
When multiple strings and control points have been surveyed. At a later date, the z-value at the control points is again measured and there is a major difference in the two z-value at each control point due to settlement or subsidence of the ground.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Scenario B:
When depths are given to you from bore hole logs and can be used to create a soil or rock strata model from your ground surface model.
See diagram below.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”8338″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column][vc_separator border_width=”5″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Click on link below to watch the video on how to create a Rock Strata Model described in Scenario B. [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_video link=”https://youtu.be/dPak8kN9Mxo” title=”Create Settlement Model or Rock Strata Model”][/vc_column][/vc_row]