• Home
  • FAQs
  • Contact Us
  • About This Wiki
  • Privacy Policy
12D Wiki Beta Test
  • Home
  • FAQs
  • Contact Us
  • About This Wiki
  • Privacy Policy

Articles Tagged: rock strata

12dwiki image on linkedin

Create Settlement Model or Rock Strata Model

 

Read More →

Contents

  • 12d Model
    • What is 12d Model Software?
  • 12d View
    • 12d View
  • 12d Field
    • Workflows
      • GNSS
        • 12dfield and GNSS – a basic guide.
        • GNSS Localisations in V15
        • Antennae Phase Center added to 12dF_GPS_PROFILES.4D
        • 12df V15: Using a GSB for N_values instead of Winter files and *.TDF_HEL
        • 12d Field – MGA94/2020 Localisation (V14)
      • TPS
        • Connecting Leica TS15, TS16, MS50 & MS60 to 12d Field
        • Connecting Trimble Instruments to 12d Field
      • Customising 12d Field
        • 12df – How to add a user defined prism
        • 12d Field – Installing Trimble Hotkeys and Sounds
        • HotKeys – Panel Sizing
        • HotKeys
      • 12df – How to add a user defined prism
      • 12d Field – Installing Trimble Hotkeys and Sounds
      • 12dfield and GNSS – a basic guide.
      • GNSS Localisations in V15
      • Antennae Phase Center added to 12dF_GPS_PROFILES.4D
      • 12df V15: Using a GSB for N_values instead of Winter files and *.TDF_HEL
      • 12d Field – MGA94/2020 Localisation (V14)
      • HotKeys – Panel Sizing
      • HotKeys
      • Connecting Leica TS15, TS16, MS50 & MS60 to 12d Field
      • Connecting Trimble Instruments to 12d Field
    • Station
      • Station LSA (V14)
      • Station Height Cal (V14)
      • Station Helmert (V14)
      • Station Standard (V14)
      • Station Details (V14)
      • Station Setup (V14)
    • Checks
      • Check Coord (V14)
      • Check Shot (V14)
      • Checks (Setout) (V14)
    • Settings
      • General Settings – TPS
      • General Settings – GNSS
    • Reconnect
      • Reconnect
    • Shutdown
      • Shutdown
    • TPS Options
    • Common Function Panel Buttons (V14)
    • TPS Settings
    • Target Heights
    • Instrument Control Bar (TPS)
    • Instrument Selection – Available Instruments Toggling
    • Setup and Configuration
  • 12d Workflows
    • Survey Workflows
      • Swinging Survey data to Control
        • Swinging Survey data to Control by Survey Data Reduction (SDR) Function
        • Swinging Survey data to Control by the 2D Helmert (advanced) panel
        • Swinging Survey data to Control by the Translate and Rotate tools
      • 12d Field Workflows
      • Swinging Survey data to Control by Survey Data Reduction (SDR) Function
      • Swinging Survey data to Control by the 2D Helmert (advanced) panel
      • Swinging Survey data to Control by the Translate and Rotate tools
      • Convert MGA 94 to MGA 2020
      • Survey Data Reduction – N values
    • Design Workflows
      • Road Design
        • Civil Road Design – Typical Workflow
      • Rock Retaining Wall Design
      • Civil Road Design – Typical Workflow
    • Water Workflows
      • Water Network
        • Excavation Quantities
      • Excavation Quantities
      • List of Stormwater Drainage Attributes
    • BIM Workflows
      • Create 3d Text
      • Attribute Manipulator – Prepare Data for Sharing in a DE Environment
      • Attribute Management for Digital Engineering
    • Your 12d Model Training Workflow links
  • 12d Training
    • 12d Model Training
  • 12d Version 15
    • V15 Project Migrate
    • V15 Project Launcher
    • Themes
    • Object Tree
    • V15 Sharing
  • Installing and Upgrading 12d Model
    • How to Install or Upgrade 12d Model
    • Authorise 12d Model
    • Certify Codemeter Dongles
    • Upgrade to 12d Model 15
    • Codemeter dongle drop outs
    • Enabling Auto Dongle Certify
    • Error starting 12d Model
    • Installing and Configuring Codemeter Network Dongle
    • Network Dongles
    • Silent Installs
    • Hardware Requirements for 12d Model
  • Project
    • Details
      • Details
      • Project Description
    • Management
      • Managers
        • Model Manager Project Menu
      • Control data display settings during data import
      • Defaults.4d
      • Trash Bin
      • Model Manager Project Menu
      • Tin Manager Project Menu
    • Sharing
      • Using OneDrive with 12d Model: Best Practices and Recommended Setup
      • Synchronize Models
      • Synchronize Tins
    • Control data display settings during data import
    • Save and Exit a 12d Model Project
    • Open / New 12d Project
    • Check Base Points
    • Backup a 12d Model Project
  • File
    • Data Input
      • DEM
        • Input DEM ascii files
      • Reading 12da into 12d Model
      • Input ArcView SHP files
      • Input DEM ascii files
      • Input DWG/DXF data
      • Input DWF file
      • Input FBX file
      • Input OBJ file
      • Input Point Cloud data
    • Data Output
      • Google Earth
        • Write Google Earth
        • Section plot as attributes
        • Old Write KML file
      • ArcView
        • Export ArcView SHP files
      • DEMs
        • Output DEMs
      • DWG/DXF/DXB
        • AutoCAD Drawing Template
        • AutoCAD Export Map File
        • Write DWG – Export 12d Model Attributes
      • AutoCAD Drawing Template
      • AutoCAD Export Map File
      • Write Google Earth
      • Section plot as attributes
      • Old Write KML file
      • Output DEMs
      • Export ArcView SHP files
      • Write DWG – Export 12d Model Attributes
      • Exporting Data to CAD
    • GIS
      • Reading Metromap Imagery Into 12d Model
      • Reading Nearmap Imagery into 12d Model
      • GIS Tools Overview
      • GIS REST Tool: A Simple Step-by-Step Guide
      • GIS REST Feature Service in depth
      • GIS Example files for download
    • Label Map Files
      • Convert .lmf to .label_mapfile
    • Map Files
      • Create / Edit Mapfiles
      • Applying Mapfiles
      • Converting .mf to .mapfile
      • Create/Edit .mf
    • Range Files
      • Populating Range File Panels
      • Slope Range File (1v in)
      • Slope Range File (Degrees)
      • Height Range File
      • Aspect Range File
      • Area Range File
      • Depth Range File
      • Slope Range File (Percentage)
    • User
      • Convert Text Strings to 3d Strings
  • View
    • View Toolbar
      • Plan View Properties
      • Clone/Copy a View
      • Changing a Views Background Colour
    • Plan View
      • Model Order – Plan View List
    • Send Tins and Rasters to Back of View
    • View Redraw – Large Data Sets
  • Model
    • Utilities
      • Remove
        • Remove Model from a View
        • Remove All Models from Project
        • Remove Models from Project
      • Add
        • Add Model to a View
        • Add All Models to Project
        • Add Model to Project
      • Save
        • Save All Models
        • Save a Model
      • Sharing
        • Share Project Models
        • Add Shared Models
        • Remove Shared Models from Project
        • Synchronize Shared Models
      • Copy Folder Models
      • Copy Project Models
      • Project Models Utilities – Project Models
      • Project Models Utilities – Removed Model/s
      • Save All Models
      • Save a Model
      • Share Project Models
      • Add Shared Models
      • Remove Shared Models from Project
      • Synchronize Shared Models
      • Remove Model from a View
      • Add Model to a View
      • Add All Models to Project
      • Add Model to Project
      • Remove All Models from Project
      • Remove Models from Project
    • Delete
      • Delete All Models
      • Delete Empty Unlocked Models
      • Delete a Model
    • Clean Model
    • Global Model Rename
    • String Information Table
    • Model Information Table
    • Model Manager
    • Model Information Panel
    • Create a Model
    • Models – Project and Removed Models
    • Model Rename
  • String
    • Create
      • Curve/Spirals
        • Protected: Temporary Post
        • Show Options (V14)
      • Protected: Temporary Post
      • Show Options (V14)
    • Super Alignments
      • Tools
        • Computate Strings
      • Computate Strings
      • Create Super Alignment
    • Strings Edit
      • Segment Strings
    • Label
      • Cut / Fill
        • Cut & Fill Tadpoles by definitions
      • Cut & Fill Tadpoles by definitions
    • Rasters
      • Edit Raster Element
      • Create Raster Element
      • Importing Nearmap Images Into 12d
    • Utilities
      • String Inquire or Super String Inquire
  • BIM
    • Import
      • IFC
        • Read IFC
        • Read IFC – General
        • Read IFC – Alignment
        • Read IFC – Unit
      • BIM Import
      • Read IFC
      • Read IFC – General
      • Read IFC – Alignment
      • Read IFC – Unit
    • Export
      • IFC
        • Write Infrastructure IFC
        • Write IFC – General
        • Write IFC – Placement
        • Write IFC – Attributes
        • Write IFC – Water
        • Write IFC – Project
        • IFC File Export – Distorted or No data displayed in Navisworks 2021
        • IFC Writer Global ID and GUID
        • 12d Model data into Revit (using IFC Files)
        • IFC File Export – Distorted / Jagged Objects in Navisworks 2020
      • Write Infrastructure IFC
      • Write IFC – General
      • Write IFC – Placement
      • Write IFC – Attributes
      • Write IFC – Water
      • Write IFC – Project
      • IFC File Export – Distorted or No data displayed in Navisworks 2021
      • IFC Writer Global ID and GUID
      • 12d Model data into Revit (using IFC Files)
      • IFC File Export – Distorted / Jagged Objects in Navisworks 2020
    • Trimesh
      • Create
        • Trimesh BIM Create By Profile along a String
        • Trimesh BIM Objects Create Trench from WNE
        • Road Signs
        • Trimesh BIM Objects Apply
        • Trimesh BIM Objects Create
        • Trimesh BIM Objects Create from 12da
        • Trimesh BIM Objects Create from Path
        • Service Chamber Many
        • Service Chamber
      • Edit
        • Replace colour by colour
        • Split Trimesh by Vertical Plane
      • Trimesh BIM Create By Profile along a String
      • Trimesh Info
      • Check Trimeshes
      • Trimesh Heal
      • Trimesh BIM Objects Create Trench from WNE
      • Road Signs
      • Replace colour by colour
      • Split Trimesh by Vertical Plane
      • Trimesh BIM Objects Apply
      • Trimesh BIM Objects Create
      • Trimesh BIM Objects Create from 12da
      • Trimesh BIM Objects Create from Path
      • Service Chamber Many
      • Service Chamber
    • Point Clouds
      • Import
        • Import LAZ files
      • Import LAZ files
    • Check / Clash
      • Check Polygon BIM Menu
      • Check Breaklines BIM Menu
    • Visualisation
      • Timelines
        • Visualisation Quick Timeline
        • Play and Record Timeline
        • Chainage Timeline
      • Visualisation Quick Timeline
      • Play and Record Timeline
      • Chainage Timeline
    • BIM and IFC Reference
  • CAD
    • CAD Control Bar
      • CAD Control Bar – How to utilise it
    • Dimension
      • Dimension Style – Arrows edit for small distance
    • Table
      • Super Alignment Reference Table
      • Cad Table and CSV files
    • Point
      • CAD Point Toolbar – Medial Axis Centre
      • CAD Point Toolbar – String IPs
      • CAD Point – Relative
      • CAD Point Toolbar – Divide String by Chainage Length
      • CAD Point Toolbar – Divide String by Number
      • CAD Point Toolbar – Divide Segment by Chainage Length
      • CAD Point Toolbar – Divide Segment by Number
      • CAD Point Toolbar – Radiation
      • CAD Point Toolbar – Between Points 3d
      • CAD Point Toolbar – Between Points
      • CAD Point Toolbar – Projection
      • CAD Point Toolbar – Deflection
      • CAD Point Toolbar – Chainage Offset Extended
      • CAD Point Toolbar – Drop Perpendicular
      • CAD Point Toolbar – Angle
      • CAD Point Toolbar – Chainage Offset
      • CAD Point Toolbar – Offset
      • CAD Point Toolbar – Bearing and Distance
      • CAD Point Toolbar – Chainage
      • CAD Point Toolbar – Mid-Point
      • CAD Point Toolbar – IP
      • CAD Point Toolbar – Centre
      • CAD Point Toolbar – Mid-segment
      • CAD Point Toolbar – Point
    • Intersection
      • CAD Intersection – 2 Points and 2 Distances
      • CAD Intersection – 2 Points and 2 Bearings
      • CAD Intersection – 2 Points with Bearing and Distance
      • CAD Intersection – 2 Segments
      • CAD Intersection – 2 Offset Segments
    • Line
      • CAD Line – Tape Baseline Absolute
      • CAD Line – Tape Baseline
      • CAD Line – Traverse Edit
      • CAD Line – Traverse Append
      • CAD Line – Traverse
      • CAD Line – Perpendicular
      • CAD Line – Tangent
      • CAD Line – 2 Points
      • CAD Line Toolbar – Line String
    • Circle
      • CAD Circle Toolbar – 3 Points
      • CAD Circle – Centre and Circumference
      • CAD Circle – Centre and Point
      • CAD Circle – Centre and Radius
      • CAD Circle – Point, Radius and Bearing
      • CAD Circle – 2 Points and Radius
      • CAD Circle – 2 Points
      • CAD Circle – 2 Directed Tangents and Radius
      • CAD Circle – 2 Tangents and Radius
      • CAD Circle – 3 Directed Tangents
    • Arc
      • CAD Arc Toolbar – Fillet by Start Point
      • CAD Arc Toolbar – Fillet
      • CAD Arc Toolbar – Start Point Radius Chord Length and Bearing
      • CAD Arc Toolbar – Centre Start Point and Sweep Angle
      • CAD Arc Toolbar – 3 Tangents
      • CAD Arc Toolbar – Centre, Radius and End Points
      • CAD Arc Toolbar – Centre and End Points
      • CAD Arc Toolbar – Start Point Radius and Bearing
      • CAD Arc Toolbar – Start Point Radius and Chord
      • CAD Arc Toolbar – 3 Directed Tangents
      • CAD Arc Toolbar – 2 Points and End Bearing
      • CAD Arc Toolbar – 2 Points and Arc Length
      • CAD Arc Toolbar – 2 Points and Radius
      • CAD Arc Toolbar – 2 Directed Tangents and Radius
      • CAD Arc Toolbar – 2 Tangents and Radius
      • CAD Arc Toolbar – 3 Points
    • Polygon
      • CAD Polygon – Boundary Polygon
      • CAD Polygon – Polygon Free Hand
      • CAD Polygon – Polygon Inscribed
      • CAD Polygon – Rectangle From 3 Points
      • CAD Polygon – Rectangle from Width and Height
      • CAD Polygon – Rectangle from 2 points
    • Text
      • CAD Text – Special Character Map
      • CAD Text – Label Perpendicular Offset
      • CAD Text – Delete
      • CAD Text – Edit
      • CAD Text – Create
    • Symbol
      • CAD Symbol – Create
      • CAD Symbol – Edit
    • Hole
      • CAD Hole – Remove
      • CAD Hole – Add
    • Fill
      • CAD Fill – Solid Many
      • CAD Fill – Solid
    • Image
      • CAD Image – Delete
      • CAD Image – Insert
      • CAD Image – Change Height
      • CAD Image – Change Width
      • CAD Image – Scale
      • CAD Image – Rotate
      • CAD Image – Move
    • Modify
      • CAD Modify – Mirror X Axis
      • CAD Modify – Scale Dynamic
      • CAD Modify – Scale
      • CAD Modify – Mirror Y Axis
      • CAD Modify – Mirror
      • CAD Modify – Rotate
      • CAD Modify – Array
      • CAD Modify – Copy
      • CAD Modify – Move
    • Vertex
      • CAD Vertex – Append
      • CAD Vertex – Extend by Length 3d
      • CAD Vertex – Extend by Length
      • CAD Vertex – Extend 3d
      • CAD Vertex – Extend
      • CAD Vertex – Move 3d
      • CAD Vertex – Move
    • Segment
      • CAD Segment – Remove 3 Points Curve
      • CAD Segment – Insert 3 Points Curve
      • CAD Segment – Radius
      • CAD Segment – Colour
    • String
      • CAD String – Trace
      • CAD String – Offset
      • CAD String – Join Fillet
      • CAD String – Join Many
      • CAD String – Join
      • CAD String – Cross Split
      • CAD String – Split
      • CAD String – Link Clip
      • CAD String – Clip Internal
      • CAD String – Clip
      • CAD String – Extend by Chainage Length
      • CAD String – Extend
      • CAD String – Trim
      • CAD String – Parallel
      • CAD String – Copy
      • CAD String – Reverse
      • CAD String – Open
      • CAD String – Close
    • Delete
      • CAD Delete – String
      • CAD Delete – Segment
      • CAD Delete – Vertex
    • Drafting
      • Text and Tables
        • Tabulate Range File
      • Tabulate Range File
    • Please, how do I turn off the co-ordinates from my screen
  • Tin
    • Create
      • Triangulate Data
      • Create Supertin
      • Quick Triangulation
      • Retriangulate Function
    • Edit
      • Exporting a 12d Supertin
      • Tin Render Settings
      • Recalc Supertin
      • Edit Supertin
      • Add Breaklines to a Tin
      • Flip Tin Triangles
      • Tin Style
      • Tin Edit Function
      • Retriangulate without a Panel
      • Retriangulate TIN
    • Boundary
      • Tin Boundary
    • Check / Clash
      • Check Polygon
      • Check Breaklines
    • Colour
      • Tin Depths Colour
      • Slope Analysis Colouring
      • Aspect Analysis Colouring
      • Tin Height Colour
      • Reset Tin Colour
      • Replace Triangles Colour by Colour
      • Colour Triangles by Strings
      • Colour Triangles by Points
      • Colour within Polygon
      • Colour of Tin
    • Contour
      • Contour, Smooth and Label – Label Method
      • Colour Contours
      • Label Contours
      • Contour a Tin
      • Change Contours
      • Contour, Smooth and Label – Range Tab
      • Contour, Smooth and Label – Smooth Contours
      • Tin Label Lines for Contours
      • Contour, Smooth and Label
    • Drape
      • Drape Alignment
    • Tin Analysis
      • Aspect
        • Aspect Analysis 2 New
        • Aspect Analysis 2
        • Aspect Analysis
      • Slope
        • Slope Analysis Flag
        • Slope Analysis 2 New
        • Slope Analysis 2
        • Slope Analysis
      • Label flow arrow
      • Polygons From Tin Colours
      • Depth Range Polygons
      • Tin Ridges and Valleys
      • Flow Arrows
      • Surface Area 2
      • Surface Area
      • Tin Tin Intersection
      • Slope Analysis Flag
      • Slope Analysis 2 New
      • Slope Analysis 2
      • Slope Analysis
      • Aspect Analysis 2 New
      • Aspect Analysis 2
      • Aspect Analysis
    • Inquire
      • Tins on a Plan View
      • Tins on a Section View
      • Drop Tin to Tin in 3d
      • Drop onto Tin in 3d
      • Tin Slope Inquire
      • Tin Height Inquire
      • Depth Between Tins Inquire
      • Tin Depth from String
      • Depth from Height Inquire
      • Tin Colour Inquire
      • Tin Aspect Inquire
    • Null
      • Null Triangles by Angle/Length (Seed)
      • Null Triangles by Angle/Length
      • Null Triangles by Length
      • Null Triangles – Outside of a Polygon
      • Null Triangles by Centroids
      • Tin Include/Exclude
      • Null by Strings
      • Resetting all Nulled Triangles
      • Null by Point
      • Null by Polygons
    • Utilities
      • Add
        • Add a Tin to a Model
        • Add All Tins to Project
        • Add Tin to Project
      • Remove
        • Remove Tin from Model
        • Remove All Tins from Project
        • Remove Tins from Project
      • Save
        • Forced Save All Tins
        • Save All Tins
        • Save Tin
      • Sharing
        • Synchronize Shared Tins
        • Remove Shared Tins from Project
        • Add Shared Tins
        • Share Project Tins
      • Translate/Copy Tin
      • Synchronize Shared Tins
      • Remove Shared Tins from Project
      • Add Shared Tins
      • Share Project Tins
      • Rotated Grid DTM
      • Tin Weed
      • Tin to Strings
      • Tin Slope Report
      • Forced Save All Tins
      • Save All Tins
      • Save Tin
      • Report Tin
      • Rename Tin
      • Create Tin Faces
      • Copy Tin
      • Grid DTM
      • Remove Tin from Model
      • Add a Tin to a Model
      • Add All Tins to Project
      • Remove All Tins from Project
      • Add Tin to Project
      • Remove Tins from Project
    • Delete
      • Delete all Tins
      • Delete a Tin
    • Tin Manager
    • Tin Information Panel
    • Tins – Project and Removed Tins
  • Survey
    • 12d Field
      • 12d Field Codes
        • 12d Field Codes Editor
      • 12d Field Utilities
        • Convert Geoid To Points
        • Check control bar position
      • Setout FLD file to strings
        • 12dField Setout FLD file to strings
      • Convert Geoid To Points
      • Check control bar position
      • 12d Field Codes Editor
      • 12dField Setout FLD file to strings
      • Running 12d Field
    • Extras
      • On Grade
    • Download Raw
      • Trimble Link – Geoid Error
    • Leica
      • Export/Import between 12d Model and Leica
        • Exporting the Job (DBX files) from Captivate to an external device
        • Generating a .fld file from Leica Captivate via a Stylesheet
        • Exporting Comma-Separated Value (.csv) files from Leica Captivate
        • Exporting a Leica Roads file from 12d Model to Leica
        • Exporting a Leica Strings file from 12d Model to Leica
        • Exporting a Leica Triangles file from 12d Model to Leica
        • Exporting a .DXF from 12d Model to Leica
        • Exporting a .CSV file from 12d Model to Leica
        • Leica Roadrunner DBX Files
      • Exporting the Job (DBX files) from Captivate to an external device
      • Generating a .fld file from Leica Captivate via a Stylesheet
      • Common data output methods in Leica Captivate
      • Exporting Comma-Separated Value (.csv) files from Leica Captivate
      • Exporting a Leica Roads file from 12d Model to Leica
      • Exporting a Leica Strings file from 12d Model to Leica
      • Exporting a Leica Triangles file from 12d Model to Leica
      • Exporting a .DXF from 12d Model to Leica
      • Exporting a .CSV file from 12d Model to Leica
      • Leica Roadrunner DBX Files
  • Design
    • Quick Start and Tools
      • Quick Start and Tools
    • Templates
      • Design Templates
    • Apply
      • Apply Template
      • Apply MTF
      • Apply MTF Trimesh formation toggle
      • Apply MTF Manager (AMM)
      • Apply MTF Multi Seed
      • Apply Kerb Return
      • String Modifiers
      • Interface
      • Amend VG
      • Design Apply Defaults
    • MTF
      • Snippets
        • MTF Snippet – Driveway Crossing (Layback)
        • MTF Snippet – Pram Ramp Crossing
        • MTF Snippet – Understanding Error Messages
      • MTF Snippet – Driveway Crossing (Layback)
      • MTF Snippet – Pram Ramp Crossing
      • MTF Analyse Subgrade
      • MTF Snippet – Understanding Error Messages
    • Boxing
      • Template Boxing
    • Pads
      • Balance a Pad
      • Dynamic Pad
      • Create and Edit Grade Pad
      • Dynamic Pad Pond Create
    • Pavement
      • Pavement Create from Tins
    • Roads
      • Components
        • Components
      • Create Roads
        • Create Roads – Things to Know
      • More
        • Drape Alignment String
        • Road Widening
        • Special Chainage File
        • X Section function
      • Create Ramps and Driveways
      • Create Roads – Things to Know
      • Drape Alignment String
      • Road Widening
      • Special Chainage File
      • X Section function
      • Components
      • Vpath (Vehicle path) Installation
    • Track
      • Track – Demystifying Track Terminology
    • Tunnels-Structures
      • Masonry Block Retaining Wall Creator
    • X-Sections
      • Colour Sections by XFALL Range
      • X-Section Construction Tables
      • Cut/ Fill Polygons from Sections
      • Name Cross Section by Chainage
      • Polygons from Sections
      • Polygons from Sections (Multi)
      • Read X-Section file
      • Sort Cross Section model
      • Strings from Sections
      • X-Section Filter
      • X-Sections along a String
      • X-Sections from Cuts through Strings
      • X-Section from Regular Cuts through strings
      • X-Sections from Points
      • Report X-Section
    • More
      • Create Settlement Model or Rock Strata Model
  • Water
    • Foul Water
      • Lot Controls and House Connections
      • Foul Water
    • Water String
      • Convert Water String to
        • Water String Conversion to Pts and Lines
      • Water String Conversion to Pts and Lines
      • Setout Strings
    • Stormwater
      • ARR2019 Storm Ensembles
      • Downhill Strings
      • Create Culvert Headwalls
    • Hydrology
      • Time of Concentration Calculator
      • Initial and Continuing Losses
    • Dynamic Drainage Analysis
      • Pipe Velocity
      • Dynamic Drainage – Major and Minor Attribute Groups
      • Checking Drainage Analysis Results – Report
    • Rational Analysis
      • Qx Routing Disabled
      • Excess Flow and Qx Routing
  • Volumes
    • Stockpile
  • Plot
    • Plot and PPF Editors
      • Long Sections
        • Using Staggered Datums
      • PPF – Pagination
      • Using Staggered Datums
      • PPF – Understanding Drawing Register Errors
  • Utilities
    • Measure
      • Measure Angle by 3 Points
      • Measure Bearing / Distance
      • Measure Plan Area
      • Measure Surface Area
      • Measure Value
      • Measure String From Point
      • Measure String from Cursor
      • Measure Xfall by Strings
      • Measure Xfall by Strings (Advanced)
    • MetaConnex
      • MetaConnex
      • MetaConnex Function Calls
    • Chains
      • Chains – Option vs Option Manual
      • Chains – Create Edit
    • Attributes
      • Classify with Attributes
      • Create/Edit Attribute Manipulator File
      • Attribute Manipulator – U and M Buttons
      • Attribute Manipulator – Copy Segment & Vertex Attributes to String Attributes
      • Attribute Manipulator – Concatenate Attributes
      • Attribute Manipulator – De-concatenate Attributes
      • Attribute Manipulator – Calculate Values
      • Attribute Manipulator and IFC Property Sets
    • A-G
      • Check / Clash
        • Check Polygon Utilities Menu
        • Check Breaklines Utilities Menu
      • Convert
        • Convert to Super Alignment – Elements
        • Convert to Super Alignment – IPs
      • Cuts
        • Cuts_options
      • Cuts_options
      • Check Polygon Utilities Menu
      • Check Breaklines Utilities Menu
      • Convert to Super Alignment – Elements
      • Convert to Super Alignment – IPs
    • H-Z
      • SPC File
        • SPC File create
      • Map
      • Model Merge/Translate
      • Rotate
      • Translate
      • Text Special Characters
      • Set Heights for 2d Strings
      • SPC File create
    • Snaps
      • Snaps
    • Edit
      • Edit – Clear All Undos
      • Edit – Redo
      • Edit – Undo
      • Edit – Undo List
    • Super Strings
      • Text (Vertex Text)
  • Tools and Concepts
    • ‘Same As’ Functionality
    • AutoCAD Colours in 12d Model
    • Toggle Drawing Density – What’s Under the Red Carpet?
    • Quickly Filter Models in a Long List Using Hover + Keyboard Shortcut
    • Text Characters and Keyboard Shortcuts
    • Square off lines for boundaries
    • Remove Models by Pick
    • How to Transfer Models Between Views in 12d Model
    • Quickly Convert Feet to Metres in 12d Model Using Cadastral Entry
    • How to Control the Display of New Data in 12d Model
    • 12d Model Projects and Synchronised Environments
    • Data Source Box
    • Target Source Box
    • 12d Model Forum
    • Search Bar Toolbar
    • Picking with Direction
    • Post Under Construction
  • Extra Tools (Macros)
    • Extra Tools
  • Configuration Files
    • User Directory Files
      • Symbols.4d
      • Plotters.4d / User_Plotters.4d
      • Linestyles and Symbols from DWG
      • Linestyl.4d
      • Colours File
      • Layout.4d
      • macros.4d and project_macros.4d
      • 12da Library
      • Project Details (project_details.dtl)
      • Workspace Layout (workspace.4dw)
      • Setting Text Style favorites
      • Loading a Text Style (Font)
      • Setups.4d
      • Userkeys.4d
      • Apply Template and Apply MTF Defaults
      • Set up Extra Help for 12d Users
      • Sheet Sizes File (Sheets.4d)
      • Panel Defaults (DDX files) Dialog Default File
      • Creating a Usermenu.4d file
      • Toolbars.4d and User_Toolbars.4d
      • Names.4d File
    • User_Lib Directory Files
      • Component Libary File
      • Title Block Files (*.tbf)
      • Screen Layout Files (*.slx)
    • Configure 12d Model – Overview
    • Configure 12d User directory files
    • Configure 12d User_Lib directory files
    • Saving Text Files
    • Writing Setup Files in 12d Model
  • ACT Customisation
    • ACT Stormwater Inlets
  • DPTI Customisation
    • DPTI Customisation (SA)
  • SA Water Customisation
    • SA Water Customisation
  • Sydney Water Customisation
    • Sydney Water Customisation
  • TfNSW Customisation
    • TfNSW Customisation – Links and Information
  • Webinars
    • 12d Model Software Webinars – All
    • Webinar – 12d Design Fundamentals (Introduction to the MTF)
    • Webinar – Attributes – What They Are and How to Use Them

Popular Articles

  • Exporting Comma-Separated Value (.csv) files from Leica Captivate
  • Common data output methods in Leica Captivate
  • Generating a .fld file from Leica Captivate via a Stylesheet
  • Exporting the Job (DBX files) from Captivate to an external device

Latest Articles

  • Triangulate Data
  • Trimesh BIM Create By Profile along a String
  • Exporting the Job (DBX files) from Captivate to an external device
  • Reading Metromap Imagery Into 12d Model

  • Home
  • FAQs
  • Contact Us
  • About This Wiki
  • Privacy Policy
Copyright © 2018 - 26 12D Wiki | Site by Spin Design.